Installation Instructions; Forewords; Warning For Installer; Basic Safety Standards - Orved evox 25 Manual De Uso

INSTALLATION INSTRUCTIONS

9. INSTALLATION INSTRUCTIONS

9.1 FOREWORDS

ATTENTION! Installation must be carried out exclusively by authorized and specialized staff, respecting
the instructions and the prescriptions in this manual.
• Before installing the machine, make sure that any pre-existing electric plants are in compliance with the Law and suitable
for the plate data of the machine to be installed (V, kW, Hz, N° of phases and power available).
• The installer must also check any prescriptions on the subject of fire-prevention.
• The Manufacturer declares compliance with the European Standards in force

9.2 WARNING FOR INSTALLER

This manual is an integral part of the product and supplies all indications necessary for correct installation and mainte-
nance of the machine.
ATTENTION! It is mandatory for the user and installer to read this manual carefully and always make re-
ference to it. Moreover, it must be kept in place that is known and accessible to the authorized operators
(installer, user, maintenance technician).
The machine is only intended for the use for which it was designed, i.e. for vacuum packing foodstuffs. All other use must
be considered improper and potentially dangerous.
The manufacturer declines any liability and all warranty obligations, whenever damage/injury occurs to persons, the
machine and objects that can be blamed on:
• Incorrect installation and/or that is not in compliance with the laws in force,
• Modifications or interventions that are not specific for the model,
• Use of non-original spare parts or those are not specific for the model,
• Failure to comply, even partial, with the instructions in this manual,
• Failure to comply with Accident-prevention Standards and the Laws in force during installation.
9.3 BASIC SAFETY STANDARDS
The main Safety Standards regarding installation are given below:
• Do not touch the machine with humid, wet or unprotected hands/feet (suitable gloves and shoes);
• Do not insert screwdrivers, kitchen instruments or other between the guards and moving parts;
• Operate after having disconnected the machine (do not pull the power supply cable).
• For any maintenance, handling, installation and cleaning operations on the machine, always use relevant prevention
and protection devices (gloves etc.).

9.4 TRANSPORT AND hANDLING

The loading and unloading of the machine from the
means of transport can be performed using suitable
means or by two persons.
ATTENTION!
The vacuum pump contains oil. Always
keep the packaging and the machine in a
horizontal position to prevent the oil leaking from
the pump vent.
All necessary precautions must be adopted when
handling the machine in order not to damage it, or
cause injury/damage to persons or objects, respec-
ting the indications positioned on the packaging.
38
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H