Regular Maintenenance; Basic Safety Standards On Regular Maintenance; Basic Safety Standards; External Surfaces Cleaning - Orved evox 25 Manual De Uso

REGULAR MAINTENANCE
8. REGULAR MAINTENANCE
Implementing the scheduled maintenance regularly, as described further on in this manual, minimizes and/or eliminates
potential faults and interference and increases the machine lifetime significantly.
Failure to perform regular maintenance can lead to significant repair costs, and in certain cases, render the guarantee
null and void.
Furthermore, a good standard of hygiene is maintained if that indicated is complied with.
8.1 BASIC SAFETY STANDARDS FOR MACHINE MAINTENANCE
The information and instructions given in this chapter are destined for all staff operating on the machine: the user and
the maintenance technician.
ATTENTION!
Do not try to repair or modify any part of the appliance: as well as making the warrant null and void, it
can be potentially dangerous. Entrust specialized technicians only.
8.1.1 ELEMENTARY SAFETY STANDARDS
To carry out cleaning and routine maintenance operations in safety, follow the regulations given below:
• Disconnect the machine from the power supply mains without pulling the power supply cable;
• Do not touch the machine with bare, humid or wet hands or feet;
• Do not insert screwdrivers, kitchen instruments or other between the guards and moving parts.
DANGER! It is prohibited to remove the guards and safety devices in order to carry out routine maintenance
operations. The Manufacturer declines all liability for accidents caused due to the failure to comply with
the above-mentioned obligation.
ATTENTION! Do not scrape the surfaces with pointed or abrasive objects!
ATTENTION! For any maintenance, handling, installation and cleaning operations on the appliance, always
use relevant prevention and protection devices (gloves etc.).
8.1.2 EXTERNAL SURFACES CLEANING
MAChINE bODy
The stainless steel external surfaces must be cleaned using a soft cloth or sponge with neutral detergent following the
direction of the satin finish.
It is recommended not to use stainless steel scrubbers, scrapers or abrasive, acid or aggressive substances, which could
damage the stainless steel surface irreparably.
After cleaning, it is recommended to protect the external surfaces with specific oil-based products for stainless steel.
ATTENTION!
Do not remove the serial number plates during cleaning. These supply important information regarding
the machine for the technical after-sales service.
32
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H