Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GENERAL SAFETy STANDARDS AND ACCIDENT PREVENTION
• Only qualified personnel can operate on the power supply system and access live parts.
• Perform regular inspections of the electrical system of the machine (these are only to be performed by qualified per-
sonnel).
• Remove and/or immediately replace loose connections or burnt wires (only qualified personnel must replace these
parts).
• Replace the power supply cable if damaged. Only qualified personnel must replace this part.
• Use only suitable plugs and sockets that comply with the electrical specifications stipulated on the identification plate
of the machine.
• Do not insert objects in the vents of the machine: risk of electric shock!
• It is strictly prohibited to use running water, water jets and/or vapour in the machine installation area: risk of electric
shock!
1.4.5 HAzARDS DERIVING FROM THE PRESENCE OF HEATING ELEMENTS (SEALING BARS)
DANGER!
• Risk of scalding: do not touch the sealing bar at the end of the work cycle.
1.4.6 MACHINE MAINTENANCE, SERVICE AND REPAIRS
DANGER!
• Remove the plug from the socket before each intervention.
• Perform all machine maintenance and servicing as scheduled.
• Any damage must only be repaired by qualified personnel.
1.4.7 MODIFYING THE APPLIANCE
DANGER!
• Do not alter the machine in any way without approval from ORVED S.p.A.
• Immediately replace all deteriorated, worn or damaged parts (qualified personnel must replace these parts).
• Only original spare parts are to be used.
1.4.8 FIRE PREVENTION
DANGER!
• Keep the vents free from obstacles (at least 10 cm away from any surrounding obstacle).
• Do not place the machine close to flammable products.
DANGER!
• Risk of burns: ventilate the environment if alcohol-based or flammable disinfectants are used. Keep open flames
away from the machine! Do not smoke!
10
Rev. 02 - 05/2016 - Cod. 1500015 - Instruction manual for vacuum chamber packaging machines EVOX 25 / EVOX 25 H
Capítulos
Tabla de contenido
