Rivacold STH009 Manual De Uso Y Mantenimiento página 59

CRANKCASE HEATER
Heats the compressor crankcase before start-up and keeps it warm during the shutdown. The heat produced evaporates any
liquid refrigerant remaining inside the compressor.
REMOTE CONTROL PANEL
Allows the positioning of the control panel away from the machine; for example next to the cell door (max distance100 m).
TENSION MONITOR
A device to protect the machine against electrical spiking, either high or low.
DIFFERENTIAL THERMO-SWITCH
A device to protect the machine against overloading, short circuits and indirect contacts.
ADDITIONAL MODULE FOR MASTER / SLAVE OPERATION
Allows the connection of two Blocksystem ST-SP in a cell and the possibility to synchronize functions (defrosting, temperature-
alarms display and Blocksystem ST-SP speed).
ADDITIONAL MODULE FOR MONITORING, RECORDING AND REMOTE MANAGEMENT
A device making it possible to connect the Blocksystem ST-SP to a remote management system.
DIFFERENT VOLTAGE
The last number of the machine code model identifies the voltage as stated below:
REMOTE MANAGEMENT SYSTEM
Allows monitoring and programming of the Blocksystem ST-SP via a PC or data recorder. It also allows advanced management
(communication via modem or GSM) of all the alarms of the Blocksystem ST-SP.
1
2
3
4
5
6
7
8
230/1/50 Hz
400/3/50 Hz
110/1/60 Hz
220/3/60 Hz
220/1/60 Hz
460/3/60 Hz
380/3/60 Hz
230/3/50 Hz
UK
ST-SP Pag. 59 Rev 00 02/10