Setting The Option Menu For Each Input Source; Option Menu Items - Yamaha R-S202 Manual De Instrucciones

SETTING THE OPTION MENU FOR EACH INPUT SOURCE

The Option menu allows you to configure various settings for each input source and recall those settings automatically
when an input source is selected.
SLEEP
LINE 1
Input selector
CD
buttons
TUNING
PRESET
TREBLE
BASS
  
/ /
ENTER
MENU
MENU

Option menu items

Available menu items vary depending on the selected input source.
Menu item
MAX VOLUME (MAX VOL)
INITIAL VOLUME (INIT VOL)
TUNER STEP (TUNER STP)
Only for Asia and General models
FM MODE
INITIAL SCAN (INIT SCAN)
Only for R-S202D
Only for R-S202D
TUNE AID
AUTO PRESET (A, PREST)
CLEAR PRESET (C, PREST)
CLEAR ALL PRESET (C,A, PREST)
AUTO POWER STANDBY
(AUTO STBY)
BLUETOOTH
PAIRING
y
The default settings are marked with "*".
30
En
LINE 2 LINE 3
TUNER BAND
MEMORY
INFO
A
SPEAKERS
B
BALANCE R
BLUETOOTH BLUETOOTH
ENTER ENTER
DIMMER
MUTE
Sets the maximum volume level so that the volume will not be accidentally increased above a
certain level.
Adjustable range: 01 to 99, MAX*
Sets the volume at the time this unit is turned on. When this parameter is set to "OFF", the
volume level used when this unit was set to standby is applied.
Adjustable range: OFF*, MUTE, 01 to 99, MAX
Sets tuner frequency step.
Choices: AM10/FM100, AM9/FM50*
Changes the FM radio wave reception mode (see pages 15, 20).
Choices: STEREO*, MONO
Performs an initial scan for DAB radio reception.
Checks reception strength of each DAB station.
Automatically detects FM radio stations and registers them as preset stations (see pages 15, 20).
Clears a selected preset station (see pages 17, 22).
Clears all preset stations (see pages 18, 23).
Sets this unit to standby mode automatically if no operation is performed in the specified time.
Choices: OFF, 2H, 4H, 8H*, 12H
Enables or disables the Bluetooth function.
Choices: OFF, ON*
Enters pairing mode (see page 13).
1
Press one of the Input selector buttons to
select the desired input source.
2
Press MENU.
3
Press  /  to select the desired menu item,
and then press ENTER.
4
Press  /  to change the settings, and then
press ENTER.
y
To return to the screen where you can select menu items,
press .
5
To exit the Option menu, press MENU.
Description