Drawing; Accessories - Vermeiren Inovys II Manual De Instrucciones

EN
NL
Cover
Storage and use temperature
Storage and use humidity
The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
ISO 7176-19: Use as seats in motor vehicles
1.3

Drawing

1.4

Accessories

The following accessories are available for the Inovys II:

Wooden table (B12)

Headrest (L55)

Headrest (L58)

Personal safety belt (B58)

Horizontal wedge (B22)

Hemiplegic armrests (B66)
Contact your specialist dealer about other accessories. He will gladly advise you.
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / °
Table 1: Technical specifications Inovys II
Page 4
Soft grey
+ 5 °C
30%
1 = Pushing handles
2 = Push bar
3 = Back
4 = Armrests
5 = Arm supports
6 = Brakes
7 = Tip cap
8 = Rear wheels (driving wheels)
9 = Frame
10 = Front wheels (steering wheels)
11 = Seat
12 = Leg supports
13 = Footrests
14 = Identification plate
Inovys II
2011-11
+ 41 °C
70%