Factory Reset - Intelbras TIP 200 LITE Guia De Instalacion

input user name and password (the factory default for both is: admin) and the
device configuration page will appear. Follow the procedures below:
1. The Status shows the system information;
2. In the Account window, under option Basic, you will find the option to configu-
re the VoIP numbers of the operator accounts;
3. In the Account field, select the account you want to configure (1 or 2);
4. In the Account Active field, select Enabled;
5. Input the name to be shown on the screen and the name to appear on the
display of the destination telephone;
6. Input the VoIP data, name of the registry in the SIP server, user name provided
by the SIP server, and authentication password for the SIP account;
7. Input the URL or IP address of your VoIP operator in the SIP Server field;
8. To confirm all the changes, click on Confirm button located at the bottom of
the configuration page;
9. Wait for a moment and the name/number inputted in the Display Name field
will appear on device;
10. Click on Codec to configure the options, according to the operator's request.
Click on the desired codec and on the appropriate arrow (move it to the right
to enable it or to the left to disable it);
11. Click on Confirm.
Note: it is possible to access the IP telephone configuration page from any com-
puter as long as it is connected to the same network.
To access the registered accounts
1. Using the navigation keys,
been enabled;
2. The selected account will appear on the display. Type in the desired number.

5. Factory Reset

1. Press Menu and, using the navigation keys,
2. Using the navigation keys,
3. Type in the password via the alphanumeric keypad (factory default: admin)
and press ;
select account 1 or 2, if both of them have
select Settings and press
select Advanced and press
;
;
43