CAUTION: Once the oven has been used, do not turn off the knobs
It is recommended to turn off the oven by pressing the power button
refractory stone and the biscotto claystone were specifically designed by Effeuno to enable the heat to be
uniformly absorbed and distributed, and to absorb the humidity of the dough, so that the pizza can be cooked in
3-4 minutes. For this reason, it is important that the toppings (oil, tomato, mozzarella, etc.) do not run off the
pizza that is about to be cooked and are not spread on the refractory stone/biscotto claystone as the latter would
absorb the liquid part of the ingredients. The pizza oven can also be used for cooking other foods; in this case,
special food-grade containers able to withstand high temperatures must be used (we recommend iron/steel
containers and we do not recommend aluminum which is not suitable for high temperatures). Do not sprinkle
too much flour on the refractory stone/biscotto claystone as it could cause smoke and fire.
7. SAFETY
The EASY PIZZA line (except for P234H and P250H) is
equipped with a manual reset safety thermostat,
located in the rear part of the oven, which switches
the oven off in the event of overheating. If the safety
thermostat trips, disconnect the power supply and
reset the thermostat by pressing the button on the
thermostat itself. If the safety thermostat trips again,
do not try to repair it by yourself. Contact the nearest
Effeuno service center.
(2)
and
The oven's exposure to a humid environment and/or a temperature below
8°C can trigger the safety thermostat. In such a case, the safety thermostat
should be reset by bringing the oven to a room temperature of at least
25°C.
Page 7 of 12
(3)
of the thermostats to zero degrees.
(1)
or directly remove the power. The
The "H" ovens of the
"Easy Pizza" line are
equipped with separate
controls for the individual
heating elements and can
reach 399/450/459/500/
509°C, depending on the
version. The separate
regulation of each heating
element ensures greater
cooking efficiency.
CAUTION:
Small technical- structural modifications
may be made to the product, depending
on the availability of some components.
Once the safety thermostat has
tripped, to restart the oven,
disconnect the power supply
cord and reset the thermostat by
pressing the button on the
thermostat itself.