Hilti PM 50MG-22 Manual De Instrucciones Original página 30

3 Description
3.1 Product overview
3.2 Intended use
This tool is a self-leveling multi-line laser level that allows a single person to transfer right angles, level
horizontally, carry out alignment work and plumb accurately.
The product is designed for mainly indoor use and is no substitute for a rotating laser. For outdoor use make
sure that the boundary conditions are the same as for indoor use, or else use a Hilti laser receiver.
Possible applications are:
• Marking the position of partition walls (at right angles and in the vertical plane).
• Checking and transferring right angles.
• Aligning components to be installed or sections of a structure in three axes.
• Transferring points marked on the floor to the ceiling.
For this product, use only the Hilti Nuron Li­ion batteries of the B 22 series stated in this table.
•
For these batteries, use only Hilti chargers of the type series stated in this table.
•
3.3 Features
The product has three green 360° laser lines with a range of up to 40 m (131 ft), and five beam intersection
points (front, rear, left, right and above). Range depends on the brightness of ambient light.
As viewed from the rear, the product has a reference point directed downward on the left-hand front. The
rear is the side where the battery is fitted.
The laser lines can be switched on either separately (vertical or horizontal line only) or together. When used
with inclination angle, the pendulum for self-leveling is blocked.
3.4 Items supplied
Multi-line laser, toolbox, operating instructions, manufacturer's certificate.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
26 English
1
Battery
@
Battery status indicator
;
Battery release button
=
Warning sticker
%
Laser exit window
&
Receiver mode button
(
Line mode button
)
Selector switch for ON / OFF and lock / un-
+
lock pendulum
Knob for fine adjustment
§
2394965
*2394965*