Silvercrest SSMW 750 D2 Manual Del Usuario página 28

Protect the power cord against
damages . Do not let it hang
over sharp edges, do not
squeeze or bend it . Keep the
power cord away from hot
surfaces and open flames .
CAUTION! Hot surface!
During use the product gets
hot . Do not touch the product
while in use nor immediately
after use .
During use, care must be taken
as low heat may be generated
at the handle .
Operation
The product must not be
left unattended while it is
connected to the supply mains .
Do not move the product while
it is in operation .
Do not use the product without
an inserted set of plates .
Do not place the product on
hot plates (gas, electric, coal
cooking range etc .) .
26 GB/IE
Operate the product on a
level, stable, clean, heat-
resistant and dry surface .
Do not cover the product while
it is in use or shortly after use,
when it is still hot .
Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates .
The use of extension cords is
not recommended .
If the use of an extension
cord is necessary, it must be
designed for a current flow of
at least 10 A .
Lay cords in such a way that
they may not be tripped over
or otherwise damaged .
The product is not intended
to be operated by means of
an external timer or separate
remote-control system .