Setting Each Camera Display Position In Split Screen - Sony YS-SX509P Manual De Instrucciones

Menu Setting Mode
Modifying the sensor position
In the default sensor screen, the first line of sensor
positions will be empty. If you need to set sensor
points on this line, please first follow the steps below.
1
Using the V (or v) button, highlight the "LEVEL
DAY" setting.
2
Using the b (or B) button, move the cursor to the
arrow (r), then press the + (or –) button.
The lines are scrolled up one line.
Setting Each Camera Display
Position in Split Screen Display
– Menu 8
You can set where each camera will be displayed when
viewing a 9 divisions split screen display.
POSITION SET
Changing a Camera Position
Example: To interchange the display positions of
camera 4 and camera 9.
54
(GB)
1
Press the MENU button 8 times to display the
(POSITION SET) menu.
The 9 divisions setting screen is displayed.
2
Using the V, v, b and B buttons, move the cursor
to the first camera number (04).
3
Press the + (or –) button to change the number to
the desired camera number (09).
• When a camera is moved to a certain position, it
will switch display positions with the camera that
was previously displayed at that position. You
cannot display the same camera image on two
positions.
4
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
Example of switched camera display