Installing The Grass Catcher - TRAPP MC-850G Manual De Instrucciones

If your lawn is very high, avoid overloading
 
the engine by using only half of cutter
cutting range, as shown below.
Attached as per drawing below:
Basket fitting the
grass catcher
Note: To check the balance of the blade, place a round tube in the blade hole and check whether the blade is
balanced as in the picture at the side. If it is not, balance it by sharpening the cutting area until the removal of
material reestablishes the balance of the blade.
The cutting blade is made of special steel,
 
induction hardening in the cut region,
providing increased safety and durability.
To achieve a perfect cut, keep the blade
 
of your mower always sharp and, for
safety reasons, replace the blade every
two years, always using safety gloves for
assembly and disassembly.
44

Installing the Grass Catcher

Grass catcher tube
Blade Balancing
Attachment
Grass catcher
If the lawnmower is vibrating, unplug it,
 
including removing the spark plug, only
then unscrew the screw and remove the
cutting blade.
Inspect blade frequently for wear or


damage such as cracks.
Keep the screw that secures the blade
 
always tight.
www.trapp.com.br