TRAPP MC-850G Manual De Instrucciones página 37

www.trapp.com.br
Note: Do not use the fuel injector when the motor
is hot.
Maintenance and Storage
For maximum performance, lubricate
 
the wheels and all points as pivot,
with motor oil every 25 hours.
To lubricate the motor, refer to the
 
"Motor Instruction Manual".
Keep all nuts and bolts tightened to
 
make sure that the mower is in use
conditions.
After each lawn cut, remove all the
 
accumulated grass at the base, both at
the top as at the bottom of the cutter.
For the cutting blades, check:
The use of original TRAPP blade.
 
Proper Edging
 
balancing area.
Correct mounting.
 
Oil Change:
In order to change the oil, proceed as
 
described in the figures below:
The lawn mowers with 6 HP motor have
 
the EXI technology not being necessary
to change the motor oil but only maintain
the level by measuring the level of the oil
dipstick. The recommended oil for this
motor is the synthetic 5W-30.
cut and perfect
In lawnmowers with 3.5 HP motors;
 
3.75 HP and 5.00 HP oil change should be
carried out by the top of the motor.
Open the motor oil cap and tilt the
 
machine. The recommended oil for these
motor is the 20W-50.
Attention!
Drain the oil when the motor in warm in a
suitable container.
Oil Draining:
Attention!
When draining oil from the upper part of the
oil filling tube, the fuel tank must by empty. If
not, fuel may leak and cause fire or explosion.
To empty the fuel tank, leave the motor
running until it stops due to lack of fuel.
37