Installing The Grass Catcher - TRAPP MB 51E Manual De Instrucciones

Machines with grass-holder - Clockwise sense.
Machines with grass-holder and side outlet -
Anti-clockwise sense
How to assemble the grass catcher:
To assemble the grass catcher, lift the rear
door, hold the grass catcher handle, place it
to operation position (fig. 6) and lower the
rear cover.
Important:
Make sure the hooks on each side of the
grass catcher frame are assembled on
the rear cover shaft.

Installing the Grass Catcher

58
✔
If your lawn is very high, avoid
overloading the engine by using only half
of cutter cutting range, as shown below.
Figure 6
ENGLISH