WIKA TR10-L Manual De Instrucciones página 17

5. Commissioning and operation
5. Commissioning and operation
Personnel: skilled personnel
DANGER!
Danger to life from explosion
Through working in flammable atmospheres, there is a risk of explosion
which can cause death.
▶
Only carry out set-up work in non-hazardous environments.
WARNING!
Physical injuries and damage to property and the environment
caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances) or harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), there is a danger of physical injuries and damage to proper-
ty and the environment.
Should a failure occur, hazardous media under high pressure or high
temperatures may be present at the instrument.
▶
For these media, in addition to all standard regulations, the appropri-
ate existing codes or regulations must also be followed.
On the wetted parts of the instrument, small residual amounts of the
calibration medium (e.g. water, oil) can adhere from production. With
increased requirements for technical cleanliness, suitability for the appli-
cation must be checked by the operator before commissioning.
Check the instrument for any damage that may have been caused.
In the event of any damage, do not commission the instrument and contact the
manufacturer immediately.
CAUTION!
Damage to property due to electrostatic discharge (ESD)
When working on open circuits (PCBs) there is a danger of damaging
sensitive electronic components through electrostatic discharge.
▶
The correct use of grounded working surfaces and personal
armbands is required.
▶
Do not touch PCBs and electrical components.
▶
Avoid contact between the electronics and clothing.
WIKA operating instructions, models TR10-L, TC10-L, TR10-0, TC10-0 (Ex d)
EN
17