Idiomas disponibles
Idiomas disponibles
Once you are satisfied with the results, remove the plug from the power socket and wait until the blade
(7) with the whisk attachment (3) has stopped rotating!
Remove the motor block (2) and put this to one side.
Remove the lid (4) by rotating it anti-clockwise.
Remove the blade holder (5) with the whisk attachment (3).
You can now remove the whipped cream or keep it in the bowl (6). In this case, you can use the
appliance base (9) as a cover for the bowl (6).
8. Cleaning
Risk of electric shock! Always remove the plug from the power socket before cleaning
commences. Otherwise, there is a risk of electric shock. Under no circumstances may the
motor block (2) be cleaned in the dishwasher, immersed in water or held under running
water.
Otherwise, there is a risk of electric shock and a fire hazard due to short circuits.
Risk of injury! Take care when cleaning the blade (7). It is extremely sharp!
Warning of damage to property! Do not use any scratching or abrasive cleaning
agents or abrasive objects (such as a metal scourer) for cleaning purposes. Otherwise the
mini chopper may be damaged.
Remove the plug from the socket.
Clean the motor block (2) with a damp cloth or a well squeezed out sponge. Use some washing up-
liquid, if necessary. Then dry the motor block (2) well.
The remaining parts can be cleaned in a rinsing bath. After cleaning, rinse all the parts with plenty of
clean water to remove any detergent residue. Dry all the parts well.
Alternatively, you can wash all components in the dishwasher, except the motor block (2).
9. Storing the device when not in use
If the mini chopper will not be used for a longer period of time, store it in a clean and dry place.
10. Troubleshooting
If your mini chopper does not work accordingly, first of all use the following instructions to try and solve the
problem. If working through the following tips does not eliminate the fault, please contact our hotline (see
the 'Warranty information' section).
The mini chopper is not working
•
The plug is not inserted. Insert the plug into the power socket.
•
The power socket is faulty. Try the device in another power socket that definitely works.
The blade (7) does not rotate
•
The blade (7) is blocked as too much food is in the bowl (6). Reduce the amount of food.
•
The blade (7) is blocked, as the pieces of food in the bowl (6) are too large. Only add food with a
maximum edge length of 2 to 3 cm.
SMZR 260 A1
English - 31
