Idiomas disponibles
Idiomas disponibles
SMZR 260 A1
• Only plug in the mini chopper to a power socket, which is
accordingly installed and easily accessible, whose mains voltage
corresponds with the rating plate specifications. Once the device is
plugged in, the power socket must be kept easily accessible so
that the plug can be pulled out quickly in an emergency.
• The power cord and plug must not be damaged. Never replace a
damaged power cord. Instead, contact the service department
(see 'Warranty information' section). If the power cord is
damaged, there is a risk of electric shock.
• If the device's power cord is damaged, it must be replaced by the
manufacturer, their service department or by a similarly qualified
person in order to prevent any hazards.
• Never open the housing of the motor block (2), as this contains
parts to be maintained. If the housing is open, there is a risk of
electric shock.
• If you notice any smoke, unusual noises or smells, remove the plug
from the power socket immediately. If this happens, you must stop
using the mini chopper until it has been checked by a specialist. If
the device catches fire, do not inhale any resulting smoke. If you
do inhale any smoke, seek medical attention. Smoke inhalation
can be harmful to your health.
• Ensure that the power cord cannot be damaged by sharp edges
or hot surfaces. The power cord must not get jammed or squashed.
Always remove the power cord from the power socket by the plug;
never pull on the cable itself. Always lay the power cord in such a
way that nobody can stand or trip on it.
• The device must always be disconnected from the mains network if
left unattended, in the event of malfunctions, prior to assembly and
disassembly or cleaning.
26 – English
