Sony HDR-CX550 Guía De Operaciónes página 26

The following states will be indicated if data is still being written onto the recording media after recording

has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
Access lamp (p. 23) is lit or flashing

The media icon in the upper right of the LCD screen is flashing

Tips

See page 72 on the recordable time of movies.

You can record photos during movie recording by pressing PHOTO fully (Dual Rec).

When a face is detected, a white frame appears and the image quality around the face is optimized

automatically ([FACE DETECTION]).
You can specify the priority face by touching it.

In the default setting, a photo is recorded automatically when the camcorder detects the smile of a person

during movie recording (Smile Shutter).
You can capture photos from recorded movies.

You can check the recordable time, estimated remaining capacity, etc., by touching

[Show others]  [MEDIA INFO] (under
The LCD screen of your camcorder can display recording images across the entire screen (full pixel

display). However, this may cause slight trimming of the top, bottom, right and left edges of images when
played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to
[ON], and record images using the outer frame displayed on the screen as a guide.
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and

then adjust the angle ().
 90 degrees (max.)
 180 degrees (max.)
When you make recording with the viewfinder only, pull out the viewfinder and close the LCD panel.

If the indicator on the viewfinder appear blurred, adjust the viewfinder lever located on the side of the
viewfinder.
[ STEADYSHOT] is set to [ACTIVE] in the default setting.

US

[MANAGE MEDIA] category).
(MENU) 
 90 degrees to the
camcorder