Idiomas disponibles
Idiomas disponibles
16.6. Setting additional functions
The setting options listed below depend on the programme and are therefore not available in all
wash programmes.
16.6.1. Selecting the start time of the wash cycle
The delay start time function can be used to start the wash cycle at a specific time.
Close the washing machine door (4).
Set the programme selector (2) to the desired position (see "12. Overview of the wash programmes" on
page 53).
Select additional functions as required (see "16.6. Setting additional functions" on page 60).
Press the Startzeitvorwahl (delay start time) button (14) several times to set the desired delay for the
wash start. It is possible to set a value of 1 to 23 hours. The digital display (17) shows
pending on the setting.
Press the Start/Pause button (12). The washing machine goes into wait mode. The wash cycle starts
automatically after the start time delay has expired. The remaining time and the
when the delay start time function is selected.
To switch off the delay start time, press the Startzeitvorwahl (delay start time) button (14).
Then start the wash cycle by pressing the Start/Pause button (12) without a preset delay start
time.
16.6.2. Temperature selection
Press the Temperatur (temperature) button (16) several times to set the required temperature for the se-
lected wash programme.
Depending on the wash programme, the following setting options are shown in the digital display (17):
- -°C (cold water) - 30°C - 40°C - 50°C - 60°C - 70°C - 80°C- 90°C.
16.6.3. Spin speed
Press the Schleudern (spin) button (15) several times to set the spin speed per minute when draining
the water.
Depending on the wash programme, the following setting options are shown in the digital display (17): - -
(no spin), 400 - 600 - 800 - 1000 - 1200 - 1400.
The noise level and the residual moisture content depend heavily on the spin speed. The higher
the spin speed in the spin cycle, the more noise and the lower the residual moisture content.
16.6.4. Anti-crease
Press the Knitterschutz (anti-crease) button (13).
The
symbol lights up constantly. This function reduces creases by reducing the speed of the drum rotation
of the laundry. The function makes ironing easier because of fewer creases in the laundry.
For programmes where the anti-crease function cannot be selected, the
out.
16.6.5. Safety lock
This feature locks the function buttons and the programme selector (2), which prevents changing settings or
interrupting the running wash programme.
Press and hold the Startzeitvorwahl (delay start time) (14) and Knitterschutz (anti-crease) (13)
buttons simultaneously for approx. 3 seconds (marked with
As soon as the safety lock has been activated,
and then goes out.
60 - English
) to switch the safety lock on or off.
is shown in the digital display (17) for approx. 2 seconds
CL
,
,
1h
2h
3h
symbol are displayed
symbol flashes briefly and goes
etc. de-
