Measuring Blood Pressure; Positioning The Cuff - Beurer BM 67 Manual De Instrucciones

Setting the hour format, date, time and
Bluetooth settings:
®
If date and time are not set, stored measurements will
not have a valid timestamp associated with them.
NOTE: Press and hold the +/- Buttons to advance val-
ues rapidly.
1. If '12h' is not flashing in the LCD Display, press and
hold the SET Button for five seconds.
2. Select an hour format (12 or 24 hour display) with
the +/- Buttons and press the SET Button to confirm.
3. The year flashes on the LCD Display. Set the year
with the +/- Buttons and press the SET Button to
confirm.
4. The month flashes on the LCD Display. Set the
month with the +/- Buttons and press the SET But-
ton to confirm.
5. The day flashes on the LCD Display. Set the day with
the +/- Buttons and press the SET Button to confirm.
NOTE: If the hour format is set to 24h, the day/
month display sequence is reversed.
6. The hour flashes on the LCD Display. Set the hour
with the +/- Buttons and press the SET Button to
confirm.
7. The minutes flash on the LCD Display. Set the min-
utes with the +/- Buttons and press the SET But-
ton to confirm.
8. 'On' will flash in the LCD Display. Use the +/- But-
tons to select whether to activate ('On') or deacti-
vate ('Of') automatic Bluetooth
mobile device. Press the SET Button to confirm and
exit. Note that keeping Bluetooth
crease battery drain.

7. Measuring Blood Pressure

The blood pressure monitor needs to be at room
temperature when measuring. Measurements can
be performed on either arm.

Positioning the Cuff:

Place the cuff on to the bare left
upper arm. The circulation of
the arm must not be hindered
by tight clothing or similar.
16
data transfer to a
®
activated will in-
®