Philips AUT1211 Manual página 9

4. Installing the system
Note:
Please check if there is sufficient space for installing the system itself, its accessories, connections, and
for servicing and repair. Under no circumstances should the system be installed outdoors. The
environment where the system is installed should adhere to any appropriate hygiene and sanitation
conditions. Avoid any external dripping liquids from pipes or drains etc. onto the system.
This system should be placed on a stable and �at surface. Keep the system away from heat. It shall
not be placed in a place that may have in�ammable gas leakage.
a. Find a proper place for the system.
b. Connect the water inlet and the three-way ball valve.
Measure the length of the 1/4" pipe you need to connect the system and the three-way ball valve,
and cut it accordingly with a pipe cutter. Insert one end of the 1/4" pipe to the three-way ball
valve, and the other end to the water inlet hole at the back of the system. Use a clip to secure the
pipe at the hole.
c. Connect the water outlet and the faucet.
Measure the length of the 1/4" pipe you need to connect the system and the faucet, and cut it
accordingly with a pipe cutter. Insert one end of the pipe into the quick connector which has been
connected with the faucet. Insert the other end of the pipe into the water outlet hole at the back
of the system. Use a clip to secure the pipe at the hole.
9