Philips AUT1211 Manual página 7

b. Insert the nut of the three-way ball valve onto the 1/4" PE pipe and insert the pipe into the convex
connector of the three-way ball valve. Tighten the nut with a wrench.
c. Install the three-way ball valve on the cold water valve.
Please don't miss the gasket inside the three-way ball valve during installation.
d. Connect the cold water hose with the three-way ball valve and screw it tightly with a wrench.
Please don't miss the gasket in the cold water hose during installation.
(1)
Gasket
(1)
(2)
Gasket
7
(2)