Adjusting The Cutting Angle - Festool TSC 55 REB Manual De Instrucciones

3
+FS
3-1

Adjusting the cutting angle

between 0° and 45°:

Unscrew the rotary knobs [4-1].

Swivel the sawing unit to the desired cutting an-
gle [4-2].

Tighten the rotary knobs [4-1].
 Both positions (0° and 45°) are set at the factory
and can be readjusted by the after-sales service
team.
When making angled cuts, slide the viewing
window/splinterguard to the highest posi-
tion!
to undercut -1° and 47°:

Swivel the saw unit to the end position (0°/45°)
as described above.

Pull out the release button [4-3] slightly.

Pull release button [4-4] as well for -1° undercuts.
The saw unit engages in the -1°/47° position.

Tighten the rotary knobs [4-1].
14
4
0° - 45°
4-1
4-2
47°
4-3
-1°
Changing the saw blade
CAUTION
Hot and sharp tools
Risk of injury

Do not use insert tools that are blunt or defec-
tive.

Wear protective gloves.
4-1
-1°
-1° / 47°
4-4