rame o the kitchen unit. Adjust the position o the rerigerator mak-
ing a 6mm space between inside wall o the kitchen unit and external
sides o the rerigerators. Fix the brackets to the horizontal rame o
the kitchen unit with screws. Insert the seal in the aperture (approx.
10mm) between the lower ront rame and bottom board o the kitch-
en. Fix lower brackets (3) to the lower ront rame with screws (2). Fix
the lower brackets to the bottom board o the kitchen unit with screws
(2). Properly insert seals in the apertures on the let, upper and right
sides o the rerigerator.
REVERSE THE FREEZER
COMPARTMENT DOOR
Reverse the reezer compartment door (Fig. 21).
1.
Unscrew the door hinge and remove it. When removing the hinge,
hold the door and set it aside (g. 21, item 2).
2.
Remove the screw securing the door stop. Remove the door hinge
screw hole plugs (Fig. 21, Item 3).
3.
Transer the door stop to the opposite side o the compartment and
tighten the screw. Also replace the hinge screw hole plugs (gure
21, item 4).
4.
Reverse the door by 180° and install on the opposite side.
5.
Install and tighten the screw o the bottom hinge that supports the
door on the opposite side (Fig. 21, item 5).
6.
When installed, open and close the door to ensure it operates
smoothly.
- 59 -