Amica UM130.3 AA Instrucciones De Operación página 56

TROUBLE-SHOOTING
Problems
The appliance does not work
The lighting inside the
chamber does not work
The appliance works contin-
uously
Water collects in the lower
part o the appliance
The appliance generates
unusual noise
Possible causes
The electric circuit is dis-
rupted
The bulb is loose or used
(only appliances with bulb
lightning type)
Incorrect setting o the
adjustment knob
See. "Temperature inside
the appliance is not low
enough or description o
other possible causes
The water discharge open-
ing is clogged (depending
on the model)
Internal air circulation ob-
structed
Incorrect levelling o the
appliance
The appliance is touch-
ing urniture and/or other
objects
- 56 -
Remedies
- check whether the plug is
properly inserted into the
socket
- check whether the power
cable o the appliance is not
damaged
- check whether there is
voltage in the socket, by
plugging another appliance,
e.g. a night lamp
- check whether the ap-
pliance is switched on by
setting the thermostat to a
position above 0.
- t the bulb correctly or
replace it (see section above
"Replacing the interior light
bulb)
- reset the knob to a lower
position
See. "Temperature inside
the appliance is not low
enough or description o
other possible remedies
- clean the discharge
opening (see the operating
manual – chapter entitled
"Derosting the ridge")
- place the ood and con-
tainers in such a way as
that they do not touch the
rear wall o the ridge
- level the appliance prop-
erly
- place the appliance at a
location that ensures proper
clearances around it