Amica UM130.3 AA Instrucciones De Operación página 57

Problems
Temperature inside the
appliance is not low enough
or too high
Certain sounds can be heard during normal use o the rerigerator, which
do not aect its correct operation.
Sounds, which can be easily prevented:
• noise caused by the appliance which is not level - adjust the position
with the adjustable turn-in ront eet. Alternatively, place pads made
o sot material under the rear rollers, especially when the appliance
is placed on tiles.
• touching the adjacent piece o urniture - move the rerigerator away.
• creaking o the drawers or shelves - take out and put back the drawer
or shel.
• sounds o clinking bottles - move bottles apart.
Sounds heard during normal use are mainly due to operation o the ther-
mostat, compressor (switching on) and cooling system (thermal expan-
sion and contraction o the radiator caused by ow o the cooling agent).
Possible causes
Incorrect setting o the
adjustment knob
The ambient temperature is
higher or lower than the cli-
mate range rom table with
technical specication
The appliance is located in
a sunlit place or near heat
sources
Too much warm ood loaded
at a time
Internal air circulation ob-
structed
The air circulation at the
back o the appliance is
obstructed
The door o the ridge/reez-
er is opened too oten and/
or remains open or too long
The door does not close
completely
The compressor is switched
on too rarely
Door gasket inserted incor-
rectly
- 57 -
Remedies
- reset the knob to a higher
position
- the appliance is adapted
to operation in the climate
range rom table with tech-
nical specication.
- move the appliance to
another place. Observe the
guidelines contained in the
manual
- wait 72 hours until the
ood becomes cool (reezes)
and the required tempera-
ture is reached inside the
chamber
- place the ood and con-
tainers in such a way that
they do not touch the rear
wall o the ridge
- move the appliance min.
30 mm away rom the wall
- reduce the requency o
opening the door and/or
shorten the time when door
remains open
- place the ood and con-
tainers so that they would
not interere with door
closed
- check whether the ambi-
ent temperature is not lower
than climate class
- press the gasket in