6
TECHNICAL SPECIFICATIONS
Motor
Electric 2.2KW 230V 1Ph
Max. blade diameter
350mm
Blade speed
2800rpm
Cutting depth
110mm
Sound pressure level
80dB(A) (ISO EN 11201)
Vibration Level
2.3m.s
Dimensions (LxWxH)
1180x585x1260mm
Electric protection
IP54
Bore diameter
25.4mm
Weight
75Kg
Cutting length
800mm
Sound energy level
92dB(A) (ISO EN 3744)
Water tray capacity
25L
Dimensions leg folded
1180x585x700mm
7
TRANSPORT
Before transporting the machine always do the following
instructions:
• Remove the blade
• Empty the water tray,
• Lock the table
• Fold and tight the legs with the locking screws
• Make sure the transport handles and wheels are mount-
ed correctly and well tighten.
• The legs of the machine must be closed.
The machine can be transported by two persons using
the transport handles or one person using the transport
wheels.
Instruction of using crane lift ing eyes
The machine is designed for crane transport by means of
the lift ing eye.
Always check the tighteness of the lift ing eyes before
using it to transport the machine. To avoid damage, also
check that the lift ing straps do not touch the motor when
lift ing.
the intented wheels.
transported by crane.
it is transported by crane.
table, it is not allowed to have any material on working
table when it is transported.
Crane lift ing eyes
(EN12418)
-2
8
Before storing always do the following instructions:
• Clean the machine
• Empty and clean the water tray
• Clean the water pump
• In case of frost, empty all water cooling system from its
water.
Store the machine in a dry place and not accessible to
children.
CAUTION:
Never move the machine by dragging. Always use
CAUTION:
Risk of injury due to improper handle when it is
CAUTION:
Risk of injury by standing under the machine when
CAUTION:
Risk of injury of falling material from the working
Lift ing eye
STORING
15
