1
SPECIAL INSTRUCTIONS
The X-COUP is only designed for the cutting of construc-
tion products mainly on construction sites. Reading
carefully this manual is compulsory for any person for
the use, maintenance, repair of this machine. Uses other
than manufacturer's instructions shall be considered as
contravening the regulations. The manufacturer shall not
be held responsible for any resulting damage. Any risk
shall be borne entirely by the user.
2
SAFETY INSTRUCTIONS
• •
Read the instructions manual prior operating the
machine the fist time.
• Remove all safety hazards in the working environment
and make it accessible in case of accident. Any person
not involved in the work should leave the working area.
• The operator must wear protective clothes including eye
and ear protection!
• Make sure the machine is in a stable position.
• Never leave the machine unattended, untied or un-
locked.
• Only fit diamond blades on the machine! Check for cor-
rect mounting and condition of the blade before using
the machine. Never use a damaged or badly worn blade.
• Do not move the machine while the blade is running
idle.
• Always cut with the blade guard in position.
• Always apply cooling water continuously while cutting!
• Check the electric cable periodically.
3
3
MACHINE PLATE
Code
Machine code
Mod
Machine name
Ser.N.
Serial number
Type
Machine type
Jaar
Year of production
W
Weight of the machine
P
Power
EN
Safety Standart
øext
Maximum blade diameter
øint
Bore diameter
Min-1
Blade speed
14
4
PICTOGRAMS
Read operator's instructions
Ear protection must be worn
Hand protection must be worn
Eye protection shall be worn
Rotation direction of the blade
Danger: risk of cut
5
MACHINE DESCRIPTION
The X-COUP Masonry saw is designed for onsite wet and
dry cutting operations of masonry, refractory and natural
stone products. Any modification or transformation of
the machine cannot be carried without prior authoriza-
tion from the manufacturer. Only the manufacturer shall
confirm the machine is still in conformity with the safety
regulations.
1 Main frame
10 Cutting head handle
2 Cutting head
11 Switch
3 Blade guard
12 Adjusting handle
4 Table
13 Motor
5 Leg
14 Water pump
6 Transport handle
15 Drain plug
7 Transport wheel
16 Blade
8 Table handle
17 Splash guard
9 Guide-a-cut
18 Table locker
