Idiomas disponibles
Idiomas disponibles
2.1 BASIC OPERATION
2.1.4 TIGHTENING CONFIRMATION LAMP AND COMMUNICATION LAMP
You can check the tightening result and the communication status by seeing the LED
lamps on the tool.
Communication Lamp Display
Lamp display
Blinking fast
Blue
(0.1 s cycle)
Blinking slowly
Blue
(1 s cycle)
Blue
Lit continuously
Lit for 1 s
Blue
+ Buzzer
EN
Communication lamp
Meaning of display
Details
When the communication lamp is blinking
fast, some communications have taken place
inside the tool or between the tool and external
Communicating
devices.
Do not pull out the USB cable or the battery
pack until it goes out.
At work in [Wireless Communication Mode], the
communication lamp blinking slowly informs
Two-way
you of the tool to use in the next tightening
Communication
work.
Stand-by Mode
While the tool is connected with the Tool
Manager software on your PC or tablet, the
communication lamp lights up.
USB connected
The communication lamp will light up when
pairing with the controller is completed.
Wireless pairing
complete
- 26 -
