CASO DESIGN CM 1000 Manual De Usuario página 52

18.3 Saving cooking settings on memory buttons
You can save frequently used cooking settings on the memory buttons, enabling you to
start a setting at the press of a button.
If the microwave is in standby mode, you can use these buttons to start a cooking setting.
Each memory button has the following standard default settings:
"HI" setting
Memory 1 2
button
Cooking :10 :20 :30 :45
time
Any combination of buttons can be programmed.
If you would like to programme a three-stage cooking setting on one of the memory
buttons, then proceed as follows:
1. Press the "PROG" button once.
2. Press the "1" button.
3. Press the "Power level" button twice.
4. Press the 7, 0, 0 buttons one after another.
Use this process to programme one-, two- or three-stage cooking settings by repeating
Steps 3-4 once or twice.
5. Press the "PROG" button to confirm and save the setting.
Following this, press the "Stop/Reset" button to return to the standby mode.
18.4 Function of the "X2" button
The "X2" button enables you to programme additional cooking settings on the memory
buttons.
Press the "X2" button while the microwave is in standby mode and then press the relevant
memory button.
The memory buttons are programmed with the following settings:
"HI" setting
Memory 1 2
button
Cooking :20 :40 1:00 01:30 02:00 03:00 04:00 05:00 06:00 07:00
time
The "X2" function can only be used to programme one-stage cooking settings.
Press the "Stop/Reset" button to return to the standby mode.
Press the "X2" button and then the relevant memory button to start the desired setting.
3 4 5
01:00 01:30 02:00 02:30 03:00
3 4 5
6 7 8
6 7 8
9 0
03:30
9 0
52