Microwave Operation; Cooking Based On Time And Setting; Multi-Stage Cooking - CASO DESIGN CM 1000 Manual De Usuario

 Close doors
Close the door until the door latch audibly locks in place. If a current cooking programme
was interrupted as a result of opening the door, the current cooking programme will be
continued automatically.

18 Microwave operation

18.1 Cooking based on time and setting

Select a setting by pressing the "Power level" button for a corresponding number of times.
Following this, use the number block to enter the cooking time.
Press "Power Level"
Once
Twice
Three times
Example: One-stage cooking at the highest power level for 4 minutes:

18.2 Multi-stage cooking

Some food must be prepared in multiple stages at different temperatures and for different
times.
You can choose between three manual settings:
Setting 1
 As described above, without pressing "Start".
Setting 2 (middle level, 6 minutes)
 1. Press the "Power level" button twice.
2. "MED" will appear on the display.
3. Press the 6, 0, 0 buttons one after another.
Setting 3 (defrost, 5 minutes)
 1. Press the "Power level" button three times.
2. "DEF" will appear on the display.
3. Press the 5, 0, 0 buttons one after another.
4. Press the "Start" button.
The display will show the total cooking time and the relevant stage. The device will beep at
the end of each stage. When the cooking process ends, the acoustic signal will beep 4
times and "0" will appear on the display.
Setting
HI
MED
DEF
1. Press the "Power level" button once.
2. "HI" will appear on the display.
3. Press the 4, 0, 0 buttons one after another.
4. Press the "Start" button.
51