Idiomas disponibles
Idiomas disponibles
PLAYA - USE AND MAINTENANCE
and change the parameter value using the increment-decrement keys. Press
SET to confirm and move to the next parameter.
PARAMETER
time filtration pump
A0
ignition program 1
duration of the pump
A1
filtration ignition
program 1
time filtration pump
A2
ignition program 2
duration of the pump
A3
filtration ignition
program 2
A4
time ignition light
duration of the light
A5
ignition
A6
not used parameter
A7
not used parameter
t0
Clock setting: hours
t1
Clock setting: minutes
KEY PUMP FILTER indicates when the filter pump is turned on
Only in Manual mode turns on and off the filter pump.
INCREASE-DECREASE KEY
Pressing and releasing quickly one of these two keys is possible to change
the setting of the water temperature. The display shows SP (= set point
water temperature) followed by ° C set. Change the value with the Up and
Down Keys and press the SET button to confirm. The heater comes into
operation after 3 minutes from each ignition of the control unit, a blinking
LED in the bottom right corner of the display indicates that the heater is in
operation.
DESCRIPTION
set the start time
(00 ÷ 23) of the
filtration pump for the
program 1
set the duration
(00 ÷ 23) of the
filtration pump
operation for the
program 1
set the start time
(00 ÷ 23) of the
filtration pump for the
program 2
set the duration (00
÷ 23) of the filtration
pump operation for the
program 2
set the start time (00 ÷
23) of light ignition
set the duration (00
÷ 23) of the light
operation
set time (00 ÷ 23)
set minutes (00 ÷ 59)
FUNCTION
on
--
= not adjustable
if A0 = on
--
= not adjustable
if A0 = on
--
not adjustable
if A0 = on
FF
= it turns on and off
with the keyboard
00
00
00
DEFAULT
= always on
= timer off
47
