SICK WTM10L Instrucciones De Uso página 45

3.5 IO-Link communication interface
4 Mounting
9382969/2024-02-23 | SICK
Subject to change without notice
Modes / func‐ Mode
tions
Teach-in Single value
1
teach-in (BGS &
FGS)
Two value teach-
2
in (BGS)
T E A C H
Manual
M
Output - Configu‐ PNP
PNP
ration of Q1 and
NPN
Q2
NPN
Push-pull
Push/
Pull
LO
LO
DO
DO
The product comes with the IO-Link communication interface.
IO-Link communication is a master-device communication system.
The product can be operated in standard I/O mode (SIO) or IO-Link mode (IOL). All
automation functions and other parameter settings are effective in IO-Link mode and in
standard I/O mode.
The following functions are supported via the standard IO-Link communication inter‐
face:
•
Flexible sensor settings
• Digital transmission of sensor signals to the IO-Link Master
• Visualization and configuration of the sensor
• Diagnostics /condition monitoring
• Device identification
• Easy device replacement
•
Events
A detailed description of the configurable functions and associated indices can be
found in the "IO-Link description" technical Information:
electric sensors, SICK Smart Sensors /
Mounting with the background suppression principle of operation
Mount the sensor using a suitable mounting bracket (see the SICK range of accesso‐
ries).
OPERATING INSTRUCTIONS
Description
The sensing range is defined by teaching in at one
single set point.
The sensing range is defined by teaching in at
two set points (object leading edge/rear edge). The
sensing range is placed in the center of the two set
points.
With "Manual" teach-in the switching distance can
be set at a fix value.
PNP output
NPN output
Push-pull output
Light operate (Q)
Dark operate (Q/)
Technical Information: Photo‐
IO-Link.
O P E R A T I N G I N S T R U C T I O N S | WTM10L
en
45