Idiomas disponibles
Idiomas disponibles
13
Annexe
13.1
Conformités et certificats
13.2
Licences
9382969/2024-02-23 | SICK
Sujet à modification sans préavis
IO-Link
Measuring range
MultiMode
Response time
SOPAS ET
Switching frequency
Vous trouverez les déclarations de conformité, les certificats et la notice d'instructions
actuelle du produit sur www.sick.com. Pour cela, saisir la référence du produit dans
le champ de recherche (référence : voir le numéro de la plaque signalétique dans le
champ « P/N » ou « Ident. no. »).
SICK utilise des logiciels libres qui sont concédés sous licence par les auteurs, entre
autres, des licences gratuites GNU General Public Licence (GPL Version 2, GPL Ver‐
sion 3) et GNU Lesser General Public Licence (LGPL), des licences MIT, zLib et des
licences dérivées de la licence BSD.
Ce programme est mis à disposition à des fins d'utilisation générale, mais SANS
AUCUNE GARANTIE. Cette exclusion de responsabilité s'étend également à la garantie
implicite de qualité marchande ou à l'adéquation du programme à un usage particulier.
IO-Link is a non-proprietary internationally standardized communi‐
cation technology, which makes it possible to communicate with
sensors and actuators in industrial environments (IEC 61131-9).
IO-Link devices communicate with higher-level control systems via
an IO-Link master. The IO-Link devices are connected to these via
a point-to-point connection.
IO-Link enables communication between controllers, sensors and
actuators and allows the parameterization and reading-out of devi‐
ces to be centrally managed.
The measuring range can be anywhere inside the detection range.
The measuring range must always be completely inside the detec‐
tion range.
The MultiMode function is used with photoelectric sensors to
select between various operating modes: e.g., Background Sup‐
pression, Foreground Suppression, Two-Point Teach-In, Two Indepen‐
dent Switching Points or Window Mode. The operating modes can
be set using the Teach-Turn adjustment (BluePilot) and IO-Link.
The MultiMode function is used with photoelectric sensors to select
between various modes and functions: e.g., Background Suppres‐
sion, Foreground Suppression, Single Value Teach-in, Two Value Teach-
in, Manual Teach-in, Speed, Standard and Precision Modes.
The various modes/functions can be set via the touch display or
IO-Link.
The response time specifies the maximum amount of time that
elapses from when an event triggers the sensor to when a signal
is present at the output.
SICK Engineering Tool for configuring IO-Link devices
Software with a graphical user interface and convenient visualiza‐
tion for configuring and parameterizing IO-Link devices.
Corresponding visualization files (SDD = SOPAS Device Description)
are available for all devices so that you can operate the IO-Link
devices using SOPAS ET.
You can download SOPAS ET and the device-specific SDDs directly
and free of charge from the SICK homepage: www.sick.com.
The switching frequency expresses the number of switching opera‐
tions performed by a sensor over a defined interval of time.
N O T I C E D ' I N S T R U C T I O N S | WTM10L
NOTICE D'INSTRUCTIONS
fr
137
