Idiomas disponibles
Idiomas disponibles
The bag is not being
sealed correctly
The bag does not hold
the vacuum after it has
been sealed
► In the event of technical troubles, faulty devices or missing parts, please contact
Customer Service.
19 Disposal of the Old Device
To protect the environment, it's important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances.
► Please take your old unit to the nearest recycling center for safe disposal.
► Until it can be disposed of properly, store your old unit away from children.
20 Guarantee
We provide a 24-month guarantee for defects caused by production or material faults,
beginning on the date of purchase. Our guarantee is valid for Germany, Austria and the
Netherlands. For all other countries, please contact us.
Your legal guarantee claims as per Art. 437 ff. German Civil Code (BGB) will remain
unaffected by this. You may exercise your statutory guarantee rights free of charge. The
guarantee does not cover damage caused by improper handling or use of the product or
defects which have only a minor impact on the product's functionality or value. In addition
to this, the guarantee also excludes parts which are subject to wear and tear; transport
damages insofar as we are not responsible for them and damages caused by repairs
which were not carried out by us. This product has been constructed for non-commercial
use (domestic use) and its performance is designed to meet the corresponding needs. The
guarantee only covers commercial use insofar as it is comparable to domestic use. The
product is not intended for any other type of commercial use.
The sealing bar is
overheating so that the bag
melts
Roll / bag is not positioned
correctly.
The bag is defective
There are leaks along the
welding seam as a result of
creases, crumbs, grease or
liquids.
PLEASE NOTE
PLEASE NOTE
Open the cover on the unit and
let it cool down for a few minutes.
Please use only specified bags
and rolls
Carefully follow all the steps in
Chapter Vacuuming and sealing.
Select another bag; wrap paper
around any sharp edges within
the bag.
Open the bag again and clean
the upper internal part of the bag.
Remove any foreign matter that
might be on the welding bar
before sealing.
46
