CASO DESIGN GourmetVAC 480 Manual Del Usuario página 36

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 88
14.4 Unpacking
Carefully remove the packaging material and unit from the carton.
14.5 Disposal of the packaging
Caso believes in the importance of recycling and has selected packaging materials that
not only protect your unit from damage during transit, but can be recycled to minimize any
ecological impact.
Recycling the packaging materials preserves raw materials and reduces waste.
Take any packaging materials that are no longer required to a recycling collection
point for proper disposal.
► If possible, keep the original packaging for the duration of the guarantee period in the
event a return is necessary.
14.6 Setup
14.6.1
Setup location requirements:
In order to ensure the safe and trouble-free operation of the device, the setup location
must fulfill the following prerequisites:
 The device must be set up on a solid, even, horizontal surface capable of supporting
the vacuum sealer and any items to be vacuum-sealed.
 Select a setup location where children cannot reach the hot sealing strip of the device.
 Do not set up the unit in a hot or damp environment or near flammable material.
 To operate correctly, the unit requires sufficient air flow. Leave at least 10 centimeters
(4 inches) of space on all sides when setting up the unit.
 Do not move the vacuum sealer when it is in operation.
 The electrical outlet must be easily accessible so that the plug can be quickly
disconnected in the case of an emergency.
 The setup of this unit in non-stationary locations (e.g., boats, airplanes, motor homes)
must be carried out by a qualified electrician, provided they guarantee the prerequisites
for the safe use of the unit.
14.7 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
 Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device.
If in doubt, ask your qualified electrician.
PLEASE NOTE
36
loading

Este manual también es adecuado para:

1387