Idiomas disponibles
Idiomas disponibles
TECHNICAL SPECIFICATIONS
Engine displacement 45 cm3
Maximum engine power 1.7 kW
Length of the bar 45 cm
Chain pitch 8.255 mm
Chain thickness 1.27 mm
Chain speed: 20.2 m/s
Idle speed 3000±300 min-1
Speed at max. power of 10,500 min-1
Fuel tank volume 0.55 l
Oil tank volume 0.26 l
Anti-vibration Yes
Sprocket sprocket 7 teeth
Chain brake Yes
Clutch Yes
Automatic oil lubrication Yes
Fuel unleaded gasoline
sminimal octane
number 90 mixed with oil in a ratio of 25:1
Weight (without bar and chain) 5.5 kg
Mean braking time at overrun speed 0.12 s
Fuel consumption 725g/kw.h
sound pressure level measured according to EN ISO
1 1681:
LpA (acoustic pressure) 99.6 dB (A) KpA=3
LWA (acoustic power) 108.6 dB (A) KwA=3
Take appropriate measures to protect your hearing!
Use hearing protection whenever the sound pressure
level exceeds 80 dB (A).
Weighted effective acceleration value according to
EN ISO 11681:
Front handle 5.247 m/s2 K=1.5
Changes reserved.
Warning: The vibration value during actual use of the
electric hand tool may differ from the declared value
depending on the way the tool is used and depending
on the following circumstances:
Method of using el. tools and the type of material
being cut or drilled, the condition of the tool and its
maintenance, the correctness of the choice of the
used accessories and ensuring their sharpness and
good condition, the grip strength of the handle, the
use of anti-vibration devices, the suitability of using
el. tools for the purpose for which they were designed
and following the work procedures according to the
manufacturer's instructions.
If this tool is used inappropriately, it can cause hand-
-shoulder tremor syndrome.
Warning: For clarification, the level of vibration in
specific conditions of use must be taken into account
in all operating modes, such as when the hand tool
is switched off in addition to operating time and when
it is idling and thus not performing work. This can
significantly reduce the level of exposure during the
entire work cycle.
Minimize the risk of shock, use sharp chisels, drills
and knives.
Maintain the tool in accordance with these instruc-
tions and ensure that it is thoroughly lubricated.
When using the tool regularly, invest in anti-vibration
accessories.
Do not use the tool at temperatures below 10 °C.
Plan your work so that you can work with e. spread
over several days with tools producing high vibrati-
ons.
ENVIRONMENTAL PROTECTIONWASTE MANAGE-
MENT
Power tools, accessories and packaging should
be provided for recycling and not to harm the
environment.
Do not dispose of power tools into household waste!
According to Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and
electronic equipment (WEEE) and its approximation
in national laws, unfit power tools must be handed
over at the point of purchase of similar equipment, or
in available collection points designated for collection
and disposal of power tools. Such disposed power
tools will be collected, disassembled and delivered for
environment-friendly recycling.
WARRANTY
In the attached material, you will find our warranty
conditions.
Date of Manufacture
The date of manufacture is incorporated into the
serial number stated in the product nameplate.
The serial number has the format of ORD-YY-MM-
SERI, where ORD is the number of purchase order,
YY stands for the year of manufacture, MM is the
month of manufacture and SERI means the serial
product number.
Výrobní číslo má formát ORD-YY-MM-SERI kde ORD
je číslo objednávky, YY je rok výroby, MM je měsíc
výroby, SERI je sériové číslo výrobku.
93
