Idiomas disponibles
Idiomas disponibles
EN
Assembly steps
Bottom ring
Bolt
10
DR826_ML_A5_v2_20230627.indb 10
DR826_ML_A5_v2_20230627.indb 10
1
Leg connector
Leg
Side bracket
Step 1: Assemble the Cart
•
Remove all screws and washers from the leg
connectors.
•
Flip the legs upside down for easy assembly.
•
Insert the connectors into the leg ends. Fix
the joint with the lock washers, flat washers
and screws.
•
Mount the castor onto the leg bottom and
tighten the nut with the wrench provided.
Repeat with the other castors.
•
Check cart balance and tighten all screws in
place.
•
Set the brakes on the castors to keep the
cart in position.
Note: While assembly, ensure to leave
screws loose to allow adjustment for the
cart. Or, it can be difficult to get all screws
in.
Step 2: Mount the Shelf brackets
2
•
Take all parts out of BBQ. Then lift and
locate the BBQ body carefully onto the cart,
ensuring the draft door at the bottom is
centred between 2 legs.
The BBQ is heavy and requires
2 people for lifting and maybe a
third person for guiding into the
cart!
•
Remove the nuts and washers from the bolts
welded on the metal bottom band on the
ceramic grill body.
•
Hang the side brackets on the bolts and
ensure the bracket's slots are facing up.
•
Attach the washers and acorn nuts
consecutively to the brackets. Then tighten
with the wrench provided.
Note: Side brackets are marked on the back
with letters indicating their position (e.g.,
LF=Left front bracket while RB=Right Back
bracket.)
2023/6/27 15:12:07
2023/6/27 15:12:07
