Idiomas disponibles
Idiomas disponibles
ENGLISH
Basic connection
• Ensure that the power switch of this unit and other equipment to be connected is set to off before commencing connection.
• Do not block ventilation holes of any of the equipment and arrange them so that air can circulate freely.
• Read through the instructions before connecting other equipment.
• Ensure that you observe the color coding when connecting audio and video cables.
• Select the appropriate screen type at the initial setting "TV Aspect" according to your TV set (4:3 or 16:9). (See page 74.)
Connecting to a stereo TV set
O
TV set
(optional)
© To power outlet
(AC 120 V, 60 Hz)
©
© To video input connector (yellow) © To S-video input connector
© To audio input connectors (red, white)t
t
© Video/audio cable
(supplied)
© DVD/VIDEO CD/-
CD player
COAXIAL
<§>
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
OPTICAL
□
\
_
/
|— © S-video cable
(optional)
© AC power
cord
(supplied)
AC h'v
■\_/
S-video output connector
The S (separate) video output connector separates the color
(C) and luminance (Y) signals before transmitting them to the
TV set in order to achieve a sharper picture.
Use the S-video cable (optional) when connecting the player
to a TV set equipped with an S-video input connector for the
best picture clarity possible.
Note:
• During DVD play, the TV volume may be at a lower level
than during TV broadcasts, etc. If this is the case, adjust the
volume to the desired level.
• If the DVD/VIDEO CD/CD player is connected to the TV
through a video cassette recorder, the picture may not be
played back normally with some DVDs. If this is the case,
do not connect the player via the VCR.
20
