Idiomas disponibles
Idiomas disponibles
MULCHING
A mulch kit isavailable asan attachment, Mulching isa process of
recirculating grassclippings repeatedly beneath the cutting deck,
The ultra-fine clippings arethen forced back into the lawn where
. they act asa natural fertilizer.
A mulch kit can be purchased.See the Replacement Parts & Attach-
ments section of this manualfor more information.
USING THE DECK LIFT LEVER
To raisethe cuttingdeck,movethe deck lift leverto the left, then place
it in the notch best suited for your application. Referto Setting The
Cutting Height earlierin this Operation section.
MOWING
I_he
machine
while it is in operation. Stop machineif anyone entersthe area.
The following information will be helpful when using the cutting deck
with yourtractor:
HEADLIGHTS
,
The lamps are ON wheneverthe tractor's engine is running.
,
The lamps turn OFF when the ignition keyis moved to the STOP
position.
Planyourmowing pattern toavoiddischarge of materials toward
roads,sidewalks, bystanders a ndthelike.Also,avoiddischarging
material a gainst a wall o r obstruction which maycausedischarged
material to ricochet backtoward theoperator.
•
Do not mowat high ground speed, especially if a mulch kit or
grass collector is installed.
•
For best results it is recommendedthat the first two laps be cut
with the discharge thrown towards the center.After the first two
laps, reversethe direction to throw the discharge to the outside
for the balance of cutting. This willgive a better appearanceto the
lawn.
•
Do not cut the grasstoo short. Short grass invitesweed growth
and yellowsquickly indry weather.
•
Mowing should alwaysbe done with the engine at full throttle.
•
Under heavier conditions it may be necessary to go back overthe
cut area a second time to get a clean cut.
•
Do NOT attemptto mow heavy brush and weedsand extremely
tall grass. Your tractor is designedto mow lawns, NOT clear
brush.
•
Keep the blades sharp and replacethe blades when worn. Refer
to Cutting Bladesin the-Servicesection of this manualfor proper
blade sharpening instructions.
17
