Costway TW10053 Manual De Instrucciones página 16

WARNING
When attaching the springs, do not place your hands, arms, legs or any other
body part close to the connector points (i.e. joints connecting the steel
tubes). The connector points can become pinch points as the trampoline
springs tighten up. Wear heavy duty working gloves to protect your hands
from pinching by the springs and protective goggles to avoid injuries to the
eyes. Be steady when installing the springs as it can rebound and fly off if
you inadvertently let go when not hooked properly. Make sure no children are
playing nearby when installing the trampoline.
STEP 7
Starting at point "one", hook one end of Spring (#8) into the Triangle-Ring on
the mat (#1). Holding Spring Loading Tool (#9) under hand, pull the other
end of the spring and lock it into the corresponding hole on the rail as shown
in FIGURE 7. Note: the two ends of the spring are different. Make sure to
install the correct ends to the mat and rail as shown below.
After you have secured the spring at point "1", attach springs to all Corner
Top Rails (# 3) as shown in FIGURE 8. For even distribution of spring tension
and ease of assembly, the springs must always be installed on opposite sides
of the mat in an alternating manner, i.e. 1, 36 followed by 18, 19; 6, 7
followed by 24, 25; 12, 13 followed by 30, 31 as shown.
Hint: Tap on the Spring (# 8) with the handle of the Spring Loading Tool to
make sure it is securely latched into the hole on the rail.
Mat
Rail
FIGURE 7
16