Idiomas disponibles
Idiomas disponibles
Step 2 – Frame Assembly
Lay out all frame parts on dry flat surface as shown in FIGURE 2. The holes
on the steel tubing parts are for installing springs and must all face up.
WARNING
Make sure that you have plenty of space and a clean dry area suitable for the
assembly of this trampoline. It should be assembled where the trampoline is
to be used. The trampoline can become unstable if it is moved after it is
IT IS ESSENTIAL THAT THE INTENDED SITE FOR
assembled.
THIS TRAMPOLINE IS COMPLETELY FLAT AND LEVEL.
ground is uneven, this could cause movement in the frame and could cause
stress on the joined sections of the frame that could damage the trampoline
and/or can cause serious injury.
2
3
2
3
5
6
5
5
3
2
5
Leg Support
6
2
11
3
6
5
5
3
If the
2
3
2
FIGURE 2
