Proxxon TSG 250/E Manual página 12

Translation of the Original Operating Instructions
G
Operating Instructions Disc sander TSG 250/E
1 Introduction .......................................12
2 Description of disc sander TSG 250/E ...12
3 Scope of delivery: ..............................13
4 Legend (Fig. 1)....................................13
5 Technical data ....................................13
6 Commissioning the device ..................14
6.1 Setting up your disc sander: ..................14
6.2 Removing and attaching the sanding table
(Fig. 3): .............................................14
6.3 Check and set angle display (Fig. 4): ......14
6.4 Setting the sanding table angle (Fig. 5): ...14
6.5 Connecting the vacuum cleaner (Fig. 6): 15
1 Introduction
Dear Customer!
The use of these instructions
• makes it easier to become acquainted with the
device,
• prevents malfunctions due to improper han-
dling, and
• increases the service life of your device.
Always keep these instructions close to hand.
Only operate this device with exact knowledge of
it and comply with the instructions.
PROXXON will not be liable for the safe function
of the device for:
• handling that does not comply with the usual
intended use,
• other application uses that are not stated in the
instructions,
• disregard of the safety regulations,
You will not have any warranty claims for:
• operating errors,
• lack of maintenance.
For your safety, please comply with the enclosed
safety regulations without fail.
Only use original PROXXON spare parts.
- 12 -
7 Working with the disc sander
TSG 250/E: .......................................15
7.1 Notes on sanding speed .....................15
7.2 Working with the angle stop (Fig. 8): ......15
7.3 Adhering or replacing the sanding discs
(Fig. 9): .............................................16
8 Accessories:.......................................16
9 Care and maintenance ........................16
10 Disposal ..........................................16
11 CE Declaration of Conformity ...............17
12 Spare parts list ....................................3
13 Exploded view ....................................79
All rights reserved for further developments within
the meaning of technical progress. We wish you
much success with the device.
WARNING!
Read all safety warnings and instruc-
tions. Failure to follow all safety war-
nings and instructions listed below may result in
electric shock, fire and/or serious injury.
KEEP ALL SAFETY WARNINGS AND INSTRUC-
TIONS FOR THE FUTURE !
2 Description of disc sander TSG 250/E
Thank you for choosing the disc sander TSG
250/E. You now have a precision instrument for
sanding long edges, end sections, radii, mitres,
or accurate flat surfaces at right angles and many
more things that require great exactness.
A high-precision manufactured and carefully bal-
anced sanding disc with dual ball-bearing syn-
chronous belt drive guarantees excellent running
smoothness, precise true run and lowest wear.
Soft and hard woods, plates, non-ferrous metals
or steel, even plastic, cork, rubber and many other
materials can be machined at sanding speeds of
approx. 250-750 m/min (adjustable).