LEGRAND KEOR SPE TOWER Manual De Instalación Y Del Usuario página 49

4.7 Multi-function buttons
ON / OFF
The button has three functions:
1. Turn on the UPS
2. Turn off the UPS
3. Fault Clear
When the UPS has a fault condition, press and hold the button for
1 second, release it after one beep, and the UPS will clear the fault
condition
LEFT
Press the button for 0.1 second to:
• Normal mode: go to the previous display
• Setup mode: decrease a number or change a setting value
RIGHT
Press the button for 0.1 second to:
• Normal mode: go to the next display
• Setup mode: increase a number or change a setting value
ESC
The button has three functions:
1. Exiting the Setup Mode
In Setup Mode, press and hold the button for 3 seconds to exit the
Setup Mode.
2. Exit setting entry without confirm
In Setup Mode, press the button for 0.1 seconds to exit the current
setting entry without confirm the changes.
3. Battery Test
Execute a manual battery test. (normal mode)
ENTER
The button has three functions:
1. Mute button
To silence an alarm (normal mode).
2. Enter the Setup Mode
Press and hold the button for 3 seconds until one beep and the SET
icon will be turned on.
3. Confirm
In Setup Mode, press the button for 0.1 seconds to:
• Enable the editing of the current setting. As confirmation, the value
on the digits will start to flash.
• Save the changes of the current setting. As confirmation, there is
one beep and the value on the digits stop to flash.
KEOR SPE TOWER
49