Idiomas disponibles
Idiomas disponibles
Heavy build-up of frost
Door seal is not air tight.
on the door seal.
Appliance is not levelled.
Appliance is touching the wall or
other objects.
Unusual noises
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or the
wall.
Side panel is hot
Condenser is inside the panel.
Water on the floor
Water drain hole is blocked.
It's normal. Heat exchange parts are
Side panels are hot.
in the sides.
If the malfunction shows again, contact the Customer Support Service.
Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool
setting). At the same time, shape the
warmed door seal by hand such that it
sits correctly.
Re-adjust the feet.
Move the appliance slightly.
If
necessary,
carefully
bend
component out of the way.
lt's normal.
Refer to the Cleaning and Care section.
Put on gloves to touch the sides, if
needed.
EN
the
31
