Mitsubishi Electric Mr.Slim SEZ-KC25 Manual De Instrucciones página 6

2. Operation
8
SUN
TIMER
˚C
0
˚C
0
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
2 A 9
6
9
Timer Settings
ON
OFF
˚C
1
WEEKLY
TIME SUN
˚C
WEEKLY
TIME SUN
˚C
WEEKLY
Hr ON
AFTER
SIMPLE
1
ON/OFF
B
FILTER
4
CHECK TEST
0
OPERATION
CLEAR
8. After making the appropriate settings at Steps 5, 6 and 7, press the
Filter button 4 to lock in the values.
To clear the currently set values for the selected operation, press
and quickly release the Check (Clear) button 1 once.
* The displayed time setting will change to "—:—", and the On/Off
and temperature settings will all disappear.
(To clear all weekly timer settings at once, hold down the Check
(Clear) button 0 for two seconds or more. The display will begin
flashing, indicating that all settings have been cleared.)
Note:
Your new entries will be cancelled if you press the Mode (Return) button
2 before pressing the Filter
If you have set two or more different operations for exactly the same
time, only the operation with the highest Operation No. will be carried
out.
9. Repeat Steps 3 to 8 as necessary to fill as many of the available cells
as you wish.
10.Press the mode (Return) button 2 to return to the standard control
screen and complete the setting procedure.
11.To activate the timer, press the Timer On/Off button 9, so that the
"Timer Off" indication disappears from the screen. Be sure that the
"Timer Off" indication is no longer displayed.
* If there are no timer settings, the "Timer Off" indication will flash on
the screen.
s s s s s How to View the Weekly Timer Settings
1. Be sure that the weekly timer indicator is visible on the screen (at 1).
2. Press the Timer Menu button B so that "Monitor" is indicated on the
screen (at 8).
3. Press the Timer On/Off (Set Day) button 9 as necessary to select
the day you wish to view.
Operation button (7 or 8) as necessary to change
4. Press the or
the timer operation shown on the display (at 9).
* Each press will advance to the next timer operation, in order of
time setting.
5. To close the monitor and return to the standard control screen, press
the Mode (Return) button 2.
s s s s s To Turn Off the Weekly Timer
Press the Timer On/Off button 9 so that "Timer Off" appears at 0.
s s s s s To Turn On the Weekly Timer
Press the Timer On/Off button 9 so that the "Timer Off" indication (at 0)
goes dark.
2.7.2. Using the Simple Timer
I You can set the simple timer in any of three ways.
• Start time only: The air conditioner starts when the set time has
elapsed.
• Stop time only: The air conditioner stops when the set time has
elapsed.
• Start & stop times: The air conditioner starts and stops at the re-
spective elapsed times.
I The simple timer (start and stop) can be set only once within a 72-hour
period.
The time setting is made in hour increments.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same time.
*2. The simple timer will not operate when any of the following conditions is in
effect.
The timer is off; the system is in malfunction state; a test run is in progress;
the remote controller is undergoing self-check or remote controller check;
the user is in the process of selecting a function; the user is in the process
of setting the timer; the system is under central control. (Under these con-
ditions, On/Off operation is prohibited.)
button 4.