COOLANT LEVEL CHECK
Check level (1) in right-hand radiator when engine is cold
(place the motorcycle so that it is perpendicular to the
ground). The coolant should be approximately 10 mm above
cells and besides, on TE-TXC and SMR models, it doesn't ex-
ceed the middle of the expansion tank (2) located in front of
the rear shock absorber.
The radiator cap is provided of two unlocking positions, the
first being for the previous pressure discharge in the cooling
system.
1
WARNING
Avoid removing radiator cap when engine is
hot, as coolant may spout out and cause
scalding.
2
WARNING
TE-SMR: Because the cooling fan (A)
can be activated even when the start switch
is in OFF position, always keep at a safe
distance from the fan vanes.
NOTE
Difficulties may arise in eliminating coolant
from varnished surfaces. If this occurs,
wash off with water.
29