Italiano
DISPOSITIVI DI TAGLIO CONSIGLIATI
8250 R - 8250 RL
5. Testina "Batti e vai" Ø 105 mm – 2 fili nylon Ø
2 mm (R)
5A. Testina "Batti e vai" Ø 105 mm – 2 fili nylon Ø
2 mm (RL)
8250 IC D
1. Lama di nylon 8 denti – Ø 9"/230 mm
2. Lama di nylon 4 denti – Ø 9"/230 mm
3. Disco "Pro Trim Universal" 3 lame – Ø 9"/230
mm
4. Disco "Pro Trim Professional" 3 lame – Ø 10"/255
mm
6. Testina "Batti e vai" Ø 130 mm – 2 fili nylon Ø
2.4 mm
7. Testina "Multiline" Ø 2.75"/73 mm – 6 fili quadrati
lato 3 mm
7A. Disco 3 denti Ø 10"/255 1.4 mm, spessore 1.8
mm
8. Disco 3 denti Ø 9"/230 mm, spessore 1.4 mm
9. Disco 4 denti Ø 9"/230 mm, spessore 1.4 mm
10. Disco 8 denti Ø 9"/230 mm, spessore 1.4 mm
ATTENZIONE! - L'utilizzo di dispositivi di
taglio non approvati dal costruttore può condurre a
situazioni di pericolo.
16
English
RECOMMENDED CUTTING DEVICES
8250 R - 8250 RL
5. "Tap and go" head Ø 105 mm – 2 nylon lines Ø
2 mm (R)
5A. "Tap and go" head Ø 105 mm – 2 nylon lines Ø
2 mm (RL)
8250 IC D
1. 8-tooth nylon blade – Ø 9"/230 mm
2. 4-tooth nylon blade – Ø 9"/230 mm
3. "Pro Trim Universal" disc 3-blade – Ø 9"/230
mm
4. "Pro Trim Professional" disc 3-blade – Ø 10"/255
mm
6. "Tap and go" head Ø 130 mm – 2 nylon lines Ø
2.4 mm
7. "Multiline" head Ø 2.75"/73 mm – 6 square
lines 3 mm sides
7A. 3-tooth disk Ø 10"/255, 1.8 mm thickness
8. 3-tooth disk Ø 9"/230 mm, 1.4 mm thickness
9. 4-tooth disk Ø 9"/230 mm, 1.4 mm thickness
10. 8-tooth disk Ø 9"/230 mm, 1.4 mm thickness
WARNING! – The use of cutting devices not
au thorised by the manufacturer can generate safety
risks.
p.n. 63079001
3.
4.
p.n. 61130055
DISPOSITIFS DE COUPE PRÉCONISÉS
8250 R - 8250 RL
5. Tête "Tap and go" Ø 105 mm – 2 fils nylon Ø 2
mm (R)
5A. Tête "Tap and go" Ø 105 mm – 2 fils nylon Ø 2
mm (RL)
8250 IC D
1. Lame nylon 8 dents – Ø 9"/230 mm
2. Lame nylon 4 dents – Ø 9"/230 mm
3. Disque "Pro Trim Universal" 3 lames – Ø 9" 230
mm
4. Disque "Pro Trim Professional" 3 lames – Ø
10"/255 mm
6. Tête "Tap and go" Ø 130 mm – 2 fils nylon Ø 2.4
mm
7. Tête "Multiline" Ø 2.75"/73 mm – 6 fils carrés
côté 3 mm
7A. Disque 3 dents Ø 10"/255 mm, épaisseur 1.8
mm
8. Disque 3 dents Ø 9"/230 mm, épaisseur 1.4
mm
9. Disque 4 dents Ø 9"/230 mm, épaisseur 1.4
mm
10. Disque 8 dents Ø 9"/230 mm, épaisseur 1.4
mm
ATTENTION! - L'utilisation d'accessoires de
coupe non approuvé par le constructeur peut entraîner
des situations à risque.
Français
