Idiomas disponibles
Idiomas disponibles
4. Lock power cord plug onto the power
cord.
1. Press the clean water tank release
button with your thumb, and then lift
up the clean water tank from the main
body using the carrying handle.
Clean Water
Tank Release
Button
2. Open the clean water tank cap. Fill
the tank with room temperature tap
water and solution. Ensure the correct
proportion of water and carpet cleaning
solution is used by referring to the
solution label. Do not exceed filling the
clean water tank over the maximum fill
line indicated on the clean water tank.
ASSEMBLY INSTRUCTIONS
Power
Cord
Plug
OPERATING INSTRUCTIONS
FILLING THE CLEAN WATER TANK
WARNING
Electrical Shock and Personal Injury
Hazard
Wrapping the cord too tightly with
excessive stress on the cord may cause
cord damage. A damaged cord is an
electrical shock hazard and could cause
personal injury or damage.
Room Temperature Water
Small area – bottom fill line
(0.2 gal liquid)
Large area – top fill line
(0.6 gal liquid)
CAUTION
Do not fill with water above 104°F
(40°C). Do not heat water or tank in
microwave.
- 10 -
Cleaning Formula
3 caps
9 caps
