Idiomas disponibles
Idiomas disponibles
7. Tilt the wand back towards you and with
the nozzle flush with the floor surface.
Press the spray trigger to apply solution
while making 2 slow wet passes: 1
forward and 1 back.
8. Release the spray trigger. Make 2 slow
dry passes: 1 forward and 1 back, to
suck up the dirty solution.
NOTE:
DO NOT hold down the trigger
for this step.
USING THE CARPET CLEANER
Spray
Trigger
CAUTION
Do not allow the carpet cleaner to
remain in one spot for any length of
time when the brushrolls are turning.
Damage to carpet may occur.
NOTE:
Do not over-saturate carpet. Be
careful not to run over loose objects or
edges of area rugs. Stalling the brushrolls
may result in premature belt failure.
9. Empty the dirty water tank when the
dirty liquid reaches the "Max Fill"
line and there is a loss in suction. See
instructions in the EMPTYING DIRTY
WATER TANK (page 16).
10. Once you have completed cleaning,
push the power button again to turn the
carpet cleaner off; unplug the power
cord from the power outlet.
- 13 -
